support Site Admin
Joined: 20 Mar 2008 Posts: 3748
|
Posted: Tue Jul 22, 2014 1:07 pm Post subject: Hidrex Setup with the SetDuo |
|
|
How to set the Hidrex PSP1000 with the Set Duo, for the simultaneous treatment of hands and feet
Please take the manual and open up page 7.
- Place the machine on a firm surface. Make sure there is a power socket nearby.
- On the back side of the machine, insert the cable of the power cord E into the correspondent connection 2 and then connect the power plug to the socket.
- Also on the back side of the machine, connect one end of the red cable D into the red connection 3 and one end of the black cable D into the black connection 3.
- Use the hard shell case A for the feet and the ergonomic treatment trays F for the hands.
- Place the electrodes with the red connections B in the hard shell case A (one electrode in each half)
- Place the electrodes with the black connections B in the ergonomic treatment trays F (one electrode in each tray)
- Place one towel C on top of each electrode
- Connect the electrodes in the hard shell case A to the red special cable adapter
- Connect the electrodes in the ergonomic treatment trays F to the black special cable adapter
- Now connect the end of the red cable D to one of the connections of the red special cable adapter
- And finally connect the end of the black cable D to one of the connections of the black special cable adapter
- Fill each case and tray with regular tap water, in order to just cover the towels. It is not necessary to cover the whole hand/foot with water. _________________ You are welcome...
Support Staff
Rental plan for iontophoresis
Buy your own home therapy iontophoresis device!
You can reach us from 9am to 5pm !Board time!
mail: info-at-iontophoresisdevice.com
Iontophoresis: WE CARE! |
|